DIY Tips For Carpet Maintenance and Cleaning Without Professionals
A nice house has neat and clean carpets. The carpets are an essential detail in the style of any room, adding personality and a comfortable feeling of home to the room. Maintaining them may seem complicated and tiring, but if you follow our advice and look after carpets regularly, they’ll always look great with very little effort. The dirt in the carpet breaks the threads and damages its structure, so that it loses its shine and becomes opaque. Regular cleaning takes better care of carpets than dry cleaning or washing.
Proper care of carpets is important for both their beauty and clean air in the home. A lot of dust and all kinds of contaminants accumulate on floors and carpets. Regular cleaning at least once a week with a powerful, competitive vacuum cleaner ensures that the carpets and air in the house are always clean.
This can be the simplest strategy to keep carpets and floors clean:
- Vacuuming your carpets regularly and thoroughly, especially in high-traffic areas, will extend the life of carpets and prevent the build-up of debris, lint, hair and dust. Vacuuming cleanly means at least five or six passes with an end carpet. Vacuuming must be done in several ways. Vacuum cleaners equipped with HEPA filters remove all fine particles (such as allergens and dust). Clean the vacuum cleaner bag often as this increases efficiency and protects the device. Clean regularly and under carpets, as much as possible, or at least around the edges.
- Steam cleaning is a very simple and extremely efficient maintenance method. If you can vacuum it on demand and at least once a week, steam cleaning is recommended once a year or as needed. Steam cleaning removes bacteria, dust mites and odors.
- Door mats are a great way to protect carpets throughout the house. These are very useful when cleaned as often as possible.
- The floors also need to be cleaned regularly, depending on the material, and their wet cleaning (with the appropriate solutions, with steam or simply with a mop vacuum cleaner) protects the carpets.
- Always use the right substances for good carpet care (never bleach, as this will damage the colors) and protect them (with curtains or blinds) from direct sunlight for a longer period of time.
A few additional tips and tricks are useful and make regular carpet care even more efficient:
- Insists on the areas where they sit and move, and vacuuming these areas must be transverse from different directions, especially if the carpets are thick and / or raised;
- Put a teaspoon of baking soda in the vacuum bag to make the unpleasant smells go away when you vacuum.
- Always clean the vacuum cleaner bag before using it. It is ideal to clean it and wash it if possible after each use.
- Before the weekly vacuum, use a spray container to spray the carpets with a solution of one part white vinegar and two parts water. This will make the carpets easier to clean.
Most carpet manufacturers recommend cleaning them with steam or with systems that use high temperature water. Cleaning products must match the type of fiber the carpet is made from. Synthetic fibers are the most practical and easy to clean. For natural fibers, whether linen, jute, wool or silk, special soap or shampoo for carpets should be used that do not contain chemicals that can attack the fibers.
Here are some tips for cleaning carpets at home:
- Carpets need to be cleaned thoroughly before they get very dirty. Otherwise it is very difficult. The frequency with which this is required depends on the traffic in the house (consider pets), but also on the type of carpets. The thick carpets made of natural fibers need to be cleaned more often, the carpets and synthetic carpets less, precisely because their regular maintenance is efficient.
- Vacuum the carpet well before and after cleaning: it must be vacuumed before cleaning to remove as much contamination as possible, and after cleaning with water, steam or various solutions to collect the rest of the contaminants removed by cleaning and raise the threads. made of fabric. Wet and dry vacuum cleaners are ideal for this process, which can be used just as efficiently on dry or wet surfaces.
- There are solutions for resistant stains that depend on the type of stain and its age. You can use commercially available foam-based carpet cleaning solutions or solvents or solutions that you already have around the house. Clean the area where there is a stain, but also around it, so as not to leave a “bright eye” on the carpet that is as visible as the stain.
- Always use a cloth or sponge and never pour the carpet cleaning solution directly onto the stain.
- Dishwashing detergent is also very good for carpets. Mix one teaspoon of dish soap with one cup of hot water. Use food and grease stains immediately. Using a sponge dipped in the solution, rub the stain well and then wipe the area by blotting and / or vacuuming.
- Use solvent oil or a nail polish remover that does not contain acetone. It is very good for paint stains, oil or for persistent and old greases.
- Mix one cup of white vinegar with two cups of water and spray on the carpet. Leave on for at least an hour and then vacuum. The water evaporates and all impurities are removed by suction. The operation is very well suctioned on the carpet beforehand. The solution gives the colors in the carpet intensity and a clean appearance.
- For a dirty carpet, combine one part dishwashing detergent and three parts water. Pour the solution into a sprayer with a foam system. Spray the foam that has formed on the carpet in a layer that is as even as possible on the carpet and leave it for a few hours. Vacuum the carpet again (it must be vacuumed very well beforehand). If necessary, repeat the process. The carpet is brought to life and cleaned in a spectacular way. For very dirty carpets, add a tablespoon of ammonia powder to the solution.
- Some carpets smell bad even if they are not very dirty. Get rid of that baking soda smell. Sprinkle baking soda on the carpet as evenly as possible. Leave it on for 30-60 minutes and then vacuum the carpet well.
Maintenance of new carpets
A new carpet will radically improve the air in the house, but it will require special attention. There is a misunderstanding that a new carpet should only be vacuumed after it has been trampled on. A new carpet can be vacuumed without damaging it after 7-10 days from the time it was placed on the floor. The amount of yarn extracted from the carpet in the first few weeks of use will be higher but will not affect its appearance or performance. In addition, regular cleaning of your new carpet is the best way to maintain it.
Use guard mats that are gentle on the new carpet. It’s a good idea to protect the new rug with an intermediate rug that will collect dirt and be easy to shake and clean.
Clean as soon as it gets dirty. Abandoned stains are difficult to remove, so it is very important to remove them right away. Solid residues can be removed with a knife, and greasy residues are treated with degreasing solutions that are placed on an absorbent cloth, just by dabbing. The liquids are cleaned with a clean absorbent cloth, also by dabbing. The traces are removed with shampoo or dishwashing detergent or with special products for cleaning carpets. If you feel like the situation is out of your hands and want to bring in professional carpet repair experts, you need to hire a carpet cleaning company instead of doing it yourself.
Well-cared for carpets give the whole house a neat look, so it is worth paying attention to them at least once a week. In addition, a house that is properly vacuumed is a healthy, allergen-free and dust-free home.
Rahul Saklani was born in India, Chandigarh in 1995. Growing up he was fascinated by reading, and this interest led to an early engagement with writing as he became interested in mythological stories. Later Mr. Rahul, who now works as Marketing Director at Digital Leap Marketing Solutions.